Last updated November 18, 2026
Insulation Cost Breakdown: The Sunrise Manor Homeowner’s Reference for 2026
Two quotes for the same attic, both promising R-49 blown insulation, and one is $1,800 while the other is $4,200. Nothing unusual about that spread in the Sunrise Manor market, and it doesn’t automatically mean someone is padding the bill. The material type, the installed density, how much air sealing prep is included, and how hard it is to reach the attic all get priced differently, and those line items are usually buried or missing. Most homeowners end up ranking quotes by the bottom line without seeing what’s inside it. This reference breaks insulation costs into their actual components so you can read a proposal the way an estimator does. We’ll cover per-square-foot ranges by material, what air sealing adds and why skipping it costs more later, how attic access shapes the price, and how to line up 2026 incentives against the work.
Quick Answer
Insulation costs in Sunrise Manor in 2026 typically run $1.50 to $4.50 per square foot installed for blown fiberglass or cellulose in an attic, and $4.00 to $9.00 per square foot for spray foam depending on open- or closed-cell. A 1,400 square foot attic usually lands somewhere between $1,800 and $4,200 for a blown-in job once air sealing and prep are included. The written estimate is what sets the final price, and the number that matters most is the scope behind it, not the total at the bottom.
Table of Contents
- What does insulation cost per square foot in Sunrise Manor?
- How do the material categories compare on cost and performance?
- What does air sealing add, and is skipping it a false economy?
- How do attic access conditions change the price?
- How much can NV Energy rebates and federal credits offset the cost?
- What should a fully scoped proposal line out?
- How do you compare two quotes fairly?
- How does a typical install day go?
What does insulation cost per square foot in Sunrise Manor?
Installed insulation in Sunrise Manor generally runs $1.50 to $9.00 per square foot, and where a given job falls in that range depends almost entirely on the material and the prep work. The per-square-foot number is the right unit for comparison, because it normalizes for attic size while still exposing the real differences in material cost and labor.
Clark County labor rates sit on the higher side of the national average, driven by the summer heat and the pace at which work has to be scheduled. Attic crews here work early and fast, because a Sunrise Manor attic in July can reach temperatures that make long stretches of work unsafe. That scheduling reality shows up in labor cost, and it’s part of why a quote from a Las Vegas or Henderson contractor and one from a local insulation specialist don’t always line up.
- Blown fiberglass: $1.50 to $2.75 per square foot installed
- Blown cellulose: $1.75 to $3.25 per square foot installed
- Mineral wool batts: $3.00 to $5.50 per square foot installed
- Open-cell spray foam: $4.00 to $6.50 per square foot installed
- Closed-cell spray foam: $5.50 to $9.00 per square foot installed
- Air sealing (added to any of the above): $0.50 to $1.50 per square foot of attic floor
- Debris removal of old insulation: $1.00 to $2.50 per square foot
A 1,200 to 1,500 square foot Sunrise Manor attic is the most common residential size we see, and it’s where most of these ranges were calculated. Smaller attics can run slightly higher per square foot because setup, access, and travel don’t scale down as fast as the floor area does. Larger attics can run lower. If you want the download on the material itself, our page on attic insulation goes deeper on how each product performs.
How do the material categories compare on cost and performance?
The five material categories aren’t interchangeable products with different price tags. They each perform differently on airflow, moisture, fire, and sound, and the right choice depends on what your attic is actually doing.
Blown fiberglass
Blown fiberglass is the most economical option on the list. It’s lightweight, installs quickly, and works well in a vented attic that’s already performing reasonably well. Knauf and Owens Corning both make reliable blown fiberglass products. The tradeoff is that fiberglass doesn’t block airflow on its own, so it depends on a separate air sealing layer to perform at its rated R-value.
Blown cellulose
Blown cellulose costs slightly more than fiberglass and brings a few things fiberglass doesn’t. It’s denser, so it slows air movement better, and GreenFiber cellulose is a high-recycled-content product for homeowners who weigh material sourcing. Cellulose is often the right call for a Sunrise Manor attic with older insulation that’s been compressed and drifted.
Mineral wool batts
Rockwool mineral wool batts cost more per square foot than blown products and bring fire resistance, moisture resistance, and sound dampening that fiberglass batts can’t match. In a Sunrise Manor home where the attic sits above a bedroom or living space, mineral wool cuts noise transfer noticeably. We install Rockwool when the attic has the clearance to take batts and the homeowner values those properties.
Spray foam (open-cell and closed-cell)
Spray foam is the most expensive material and the only one that delivers a true airtight thermal and moisture barrier in a single product. Icynene and Demelec both make top-tier open- and closed-cell foam systems. Open-cell foam is the softer, more vapor-permeable option and works well on the underside of a roof deck. Closed-cell foam is denser, adds structural rigidity, and blocks moisture. Our spray foam insulation page explains when each is the right fit.
What does air sealing add, and is skipping it a false economy?
Air sealing typically adds $0.50 to $1.50 per square foot, or roughly $700 to $2,100 on a 1,400 square foot attic, and it is the single highest-value item in a typical Sunrise Manor insulation job. Here’s why: insulation slows conductive heat transfer, but it does nothing about air that leaks through gaps around can lights, top plates, wiring penetrations, and attic hatches. A Sunrise Manor attic with 20 or 30 of these openings will leak enough air to undercut the R-value you just paid to install.
The dollar math is simple. Insulation up to a higher R-value target might cost an extra $400 to $800 on the same attic and deliver modest performance gain. Air sealing the same attic costs less per R-value point of effective performance, because it closes the pathways that make insulation work in the first place. Skipping air sealing to save $1,000 on the quote usually means the attic performs like it has half the insulation.
The general sequence a trained technician follows:
- Remove old insulation where it’s contaminated or compressed, and vacuum out debris.
- Locate every air leak with a blower door or smoke pencil and mark it.
- Seal penetrations, top plates, and can lights with foam or caulk rated for the location.
- Install a proper baffle system at the eaves so new insulation doesn’t block ventilation.
- Blow in or install the new insulation to the target depth.
- Install an attic hatch cover and re-test airflow where applicable.
That sequence is what separates a properly scoped job from a quick blow-and-go. Ask any contractor you consider whether their quote includes air sealing, and check that the line item spells out what gets sealed.
How do attic access conditions change the price?
Attic access conditions create legitimate cost variation between two quotes for the same square footage, and none of it is padding. A 1,400 square foot attic with a 30-inch hatch and clean floors is a very different job from a 1,400 square foot attic with a 24-inch hatch, a low roof pitch, and storage running the length of the ridge.
- Hatch size and location: A small hatch in a hallway closet requires more time and equipment to move material through, which raises labor cost.
- Interior storage or finished space: Attics with stored boxes, finished knee walls, or HVAC equipment in the way take longer and often require protective covering.
- Existing insulation depth: A 4-inch layer of old compressed fiberglass must be removed or worked around, which adds debris removal cost.
- Roof pitch and clearance: Low-slope roofs limit where a technician can stand and how evenly material can be installed.
- HVAC ductwork in the attic: Ducts often need to be sealed or boxed out, which is a separate line item.
The verification point is this: any quote that doesn’t factor these conditions in writing either wasn’t based on an in-person look or is hoping the conditions don’t come up. A free estimate from a local specialist should include a walk of the attic, not just the square footage and a phone number. Our service overview at Attic Insulation Sunrise Manor explains how we conduct that first visit.
How much can NV Energy rebates and federal credits offset the cost?
NV Energy offers insulation upgrade rebates to Southern Nevada homeowners, and the federal 25C tax credit can be stacked on top when the installed R-value meets the credit’s requirements. The combination can offset a meaningful share of the total, but the exact amount depends on the program’s current rules and the audit results, so we confirm eligibility during the free estimate instead of quoting a number up front.
The general framework a homeowner should know:
- NV Energy rebate programs for residential insulation are administered by the utility, and most require a home energy audit or a verified installed R-value to qualify.
- The federal 25C credit covers a percentage of the material cost (not labor) up to a per-year cap, and triggers on qualifying R-value targets for the climate zone.
- Rebates and credits can typically be combined on the same job, but you’ll want documentation from the installer: the product specification, the installed depth, and the manufacturer’s certification that the product qualifies.
- Utility programs change year to year, so verify current terms with NV Energy before you sign a contract, not after.
What this means on a quote: the number to compare isn’t just the gross cost, it’s the net cost after the rebate and credit. Ask your estimator to list every line item that qualifies and to supply the manufacturer documentation for the credit. If a contractor can’t tell you which of their materials qualifies for the federal credit, that’s a signal to keep looking.
What should a fully scoped proposal line out?
A fully scoped insulation proposal lists every component separately with a quantity and a price, not a single lump sum. If a quote you receive is one line with a dollar figure and a target R-value, ask for it to be broken down before you compare it to anything else.
Typical cost weights on a 1,400 square foot Sunrise Manor attic job, percentage of total:
- Materials (insulation product): 35 – 45%
- Labor (installation and access time): 25 – 35%
- Air sealing prep: 10 – 18%
- Debris removal and disposal: 5 – 15%
- Baffles, hatch covers, and small materials: 3 – 7%
What your written proposal should include, line by line:
- Pre-install inspection findings – attic square footage, existing insulation type and depth, and conditions observed.
- Product specification – manufacturer name, product, and target installed R-value or depth.
- Air sealing scope – what gets sealed and how many penetrations are accounted for.
- Removal and disposal – whether old insulation is removed, and where it goes.
- Ventilation and baffles – confirmation that eave vents remain open.
- Hatch cover – whether the attic access door is insulated and sealed.
- Incentive documentation – what qualifies for NV Energy and federal credits with manufacturer documentation.
- Warranty terms – what’s covered, and for how long.
Compare the components across quotes, not the totals. Two quotes at the same bottom line can differ by $800 worth of air sealing and $400 of debris removal. Two quotes $1,200 apart can be the same real value once those line items are matched.
How do you compare two quotes fairly?
To compare two insulation quotes fairly, line them up by scope, not by total. The right method is to take the component list from the quote you trust more and check each item against the other quote, then re-price anything missing.
- Put both quotes on the same page and match the product category. Blown fiberglass against closed-cell spray foam is not a fair comparison.
- Match the target R-value. A quote for a higher R-value costs more for a reason; compare on performance, not just depth.
- Check the air sealing line. If one includes it and the other doesn’t, adjust the cheaper quote up by the typical $0.50 to $1.50 per square foot.
- Check removal and disposal. If the existing insulation isn’t listed, ask what happens to it.
- Check what’s excluded. If a quote says “additional prep may be needed” without a number, ask for the number.
- Check warranty terms. Installation defects should be covered separately from material defects.
In our experience, the quotes that look highest at the start are usually the ones with the most scope already included, and the quotes that look cheapest are the ones with the most left out. The real cost is the total after the job is complete, and the fastest path to that number is an accurate written scope from the beginning.
How does a typical install day go?
A typical Sunrise Manor attic insulation install takes one to two days, depending on the removal scope, the access conditions, and material choice. Spray foam often takes two days because the foam has to cure between passes and the second day is often a small touch-up and inspection.
The general sequence a job follows:
- Free estimate visit. A technician walks the attic, records dimensions and conditions, and takes photos.
- Written quote. Every line item is spelled out with a price, and incentive documentation is included.
- Scheduled install day. Material is staged and protected, and old insulation is removed if scoped.
- Air sealing. Leaks are sealed before any new insulation goes in.
- Installation. Insulation is blown in or sprayed, with depth markers installed so you can verify the target was reached.
- Final inspection. Photos are taken, documentation is provided for rebates and credits, and the attic access is resealed.
The one thing we tell every homeowner to ask: “may I see the depth markers after the install?” A contractor confident in the scope will always say yes. If the answer is vague, that’s a signal.
Common Mistakes to Avoid
- Comparing totals instead of scopes. Two quotes $1,200 apart can be the same real value once air sealing, removal, and incentive documentation are lined up against each other.
- Skipping air sealing to save on the quote. Air sealing is the cheapest effective performance gain per dollar on a Sunrise Manor attic, and skipping it usually means paying for insulation that doesn’t perform at its rated R-value.
- Assuming all R-values mean the same thing. “R-49” is a target, not a guarantee. The installed density, coverage, and air sealing prep determine how well that target actually performs.
- Not verifying the contractor’s product certifications. Knauf, Rockwool, CertainTeed, Icynene, and the other major manufacturers publish product data sheets; ask for them before you sign anything.
- Ignoring removal and disposal on old insulation. A compressed, contaminated layer of old fiberglass nullifies the new insulation above it; if removal isn’t scoped, ask why.
- Missing the rebate documentation deadline. NV Energy and the federal 25C credit both require documentation at the time of install, not weeks after; ask for it up front.
- Skipping the hatch cover. A 30-inch attic hatch with no insulated cover is one of the biggest air leaks in a Sunrise Manor home, and it’s one of the cheapest items to fix.
When to Call a Professional
Call a professional when the attic has any of the following: an existing insulation job that underperformed, condensation or moisture staining on the roof deck, visible gaps around can lights and top plates you’re not sure how to seal, HVAC equipment set in the middle of the attic floor, or a quote with more than one item unclear in the scope. Attic work involves tight spaces, high summer temperatures, and sometimes existing wiring, so the parts that involve sealing around electrical penetrations should be done by a trained technician rather than tackled as a weekend project. Our technicians have up to 11 years of experience with attic insulation, spray foam, and blown-in installations, and we install materials from eight manufacturer brands so the recommendation follows the attic’s conditions rather than whatever’s easiest to source. Attic Insulation Sunrise Manor offers free estimates in Sunrise Manor and the surrounding east valley; call (844) 320-9312 to schedule one.
Frequently Asked Questions
Attic insulation in Sunrise Manor typically runs $1,800 to $4,200 for a 1,400 square foot attic with blown fiberglass or cellulose, including air sealing and debris removal. Spray foam on the same attic typically runs $5,500 to $12,500 depending on open-cell versus closed-cell. The written estimate sets the final price. Call (844) 320-9312 for an exact quote; estimates are free.
Yes. The estimate is free and there’s no obligation afterward. A technician walks the attic, records the conditions, documents the target R-value and scope, and provides a written quote. Call (844) 320-9312 to schedule your free estimate.
Most Sunrise Manor attic projects take one to two days. Removal and disposal of old insulation adds a day on some jobs, and spray foam installations often need two days because the foam has to cure before the final inspection pass. Call (844) 320-9312 for an accurate timeline once the attic has been looked at.
Not always, but compressed or contaminated old insulation should be removed because it blocks the new material from performing. A 2-inch compressed layer of old fiberglass acts as an air barrier that keeps new insulation from reaching its rated R-value. An estimator will tell you during the visit whether removal is needed.
There’s no single best material; the right one depends on the attic’s conditions. Blown fiberglass and cellulose are cost-effective for vented attics in good shape, Rockwool mineral wool is worth the premium when fire resistance and sound matter, and spray foam is the right choice for a conditioned attic or a home with major air sealing needs. Call (844) 320-9312 to talk through the options for your specific attic.
Yes, and it’s usually the highest-value item in the job. Air sealing typically adds $0.50 to $1.50 per square foot, roughly $700 to $2,100 on a 1,400 square foot attic, and it closes the pathways that make insulation work. Skipping it to save $1,000 on the quote often costs more in performance than the insulation itself delivers. Call (844) 320-9312 for a scoped quote that lines it out.
The Bottom Line
The real insulation question isn’t “which quote is cheapest?” It’s “which quote includes the right material, at the right density, with air sealing and removal done right?” Sunrise Manor attics are hot, dusty, and often carry old compressed insulation that has to be dealt with before anything new goes in. The numbers to keep in your head: $1.50 to $4.50 per square foot for blown products, $4.00 to $9.00 for spray foam, air sealing at $0.50 to $1.50 per square foot, and NV Energy rebates plus the federal 25C credit offsetting part of the total when documented properly. A written estimate that lines those out is the only one worth comparing, and the contractor willing to show you the depth markers after the job is the one to trust.
Attic Insulation Sunrise Manor offers three residential insulation services – attic, spray foam, and blown-in – and installs materials from eight manufacturer brands: Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demelec, and GreenFiber. That breadth means the recommendation follows your attic’s conditions, not what’s easiest to install. Whether your home is in Sunrise Manor proper or just outside, we’ll walk the attic, document the scope, and give you a written estimate before any work begins. Call (844) 320-9312 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Attic Insulation Sunrise Manor.