Insulation Company in Summerlin, NV
Blown-in insulation is the work Summerlin homeowners call us about most, and it’s usually not because their attic is empty. It’s because the fiberglass that went in when the house was built has settled, thinned out, and stopped doing its job under 110°F summers. Summerlin was master-planned by the Howard Hughes Corporation starting in 1990, so most of the housing here went up under a known era of Nevada energy code. That gives us a predictable starting point: builder-grade R-13 batts in walls, thin attic coverage, and a roof assembly that wasn’t designed for the heat it now faces. We match the material and the method to what your attic actually needs. Call (844) 320-9312 for a free estimate.
Why Summerlin Homes Are Different
Summerlin sits at roughly 3,000 feet on the western edge of the Las Vegas Valley. Summer highs regularly pass 105°F, and attic temperatures can top 150°F. That heat does two things: it drives cooling load through the roof assembly, and it degrades and compacts insulation over time. In a 1990s or 2000s production home, the original blown fiberglass often settles several inches, and you can spot it as bare drywall stripes at the attic edges.
The housing stock shapes the work too. Most Summerlin homes are stucco on wood frame with tile roofs, slab-on-grade, frequently two-story. Tile roofs mean tight, low-clearance framing and fragile underlayment, so attic retrofits go slower than they would under a simple gable. Two-story plans add large kneewall cavities, and high-ceiling great rooms make air sealing fussy. This isn’t a neighborhood of drafty old houses. It’s a neighborhood of homes built to a 1990s – 2000s standard that can be brought up to a better one. R-value in the roof assembly, ventilation, and radiant-barrier placement matter more here than wall insulation. Winters are mild, but desert nights still dip near freezing, so the assembly has to work in both directions.
Our Main Summerlin Services
Two jobs come up again and again in Summerlin: upgrading attic insulation and sealing the building envelope with spray foam.
Attic Insulation in Summerlin
Most Summerlin attic work starts with removing or leveling settled material, air sealing the top plates and penetrations, then bringing coverage back to a consistent depth. In two-story plans the kneewall cavities and the sloped ceilings over great rooms are where coverage usually falls short, and they’re where we spend the most time. Roof assembly and ventilation get checked before anything goes in, because adding insulation over a poorly vented tile roof traps heat instead of keeping it out. If you want the full breakdown of what the job involves, see attic insulation in Summerlin.

Spray Foam Insulation in Summerlin
Spray foam handles the problems batt insulation can’t in this climate: air leaks at rim joists, penetrations, and the attic-to-living-space boundary. We work with Icynene and Demilec systems, which cover both closed-cell and open-cell needs, so the choice comes down to the space rather than to what’s on hand. Closed-cell makes sense where you need an airtight vapor barrier and the highest R-value per inch; open-cell suits cavities where vapor permeability matters. High-ceiling great rooms in Summerlin are a common candidate. The full process is covered under spray foam insulation in Summerlin.

Blown In Insulation in Summerlin
Blown-in is the right answer for most Summerlin attics, and here’s why. The homes built here from the 1990s through the 2010s were insulated to the code of their day, which means the material is present but settled, thin, and uneven after years of 150°F attic heat. Blown-in lets us bring coverage back to a uniform depth without tearing anything apart, and it fills the irregular framing around tile-roof kneewalls that batts can’t follow. We install blown-in as one of three methods we offer alongside attic insulation and spray foam, so the recommendation comes from your attic’s conditions, not from a crew that only does one thing. You can read the general method at Blown In Insulation.
Blown In Cellulose Insulation
Signs you need it
You’re seeing bare drywall stripes along the attic edges where the original material has settled away from the framing.
What it costs in Summerlin
Blown-in cellulose in Summerlin typically runs $1,200 – $3,500 depending on attic square footage, existing depth, and how much old material has to come out first.
How we do it
We measure existing depth, air seal the top plates and penetrations, then blow GreenFiber cellulose to a consistent depth across the full attic floor, working around kneewalls and any recessed fixtures.
Blown In Fiberglass Insulation
Signs you need it
Your attic has loose fiberglass that’s compacted into a thin mat, or you want to add depth over existing fiberglass without a full removal.
What it costs in Summerlin
Typical installed cost lands in the same $1,200 – $3,500 range, with the final number set by attic size, access, and the condition of what’s already up there.
How we do it
We rake the existing material level, verify ventilation at the soffits and ridge, then blow new fiberglass over the top to reach an even blanket depth with no thin spots near the eaves.
What Blown In Insulation Costs in Summerlin
| Item | Typical range in Summerlin |
|---|---|
| Blown-in insulation (attic) | $1,200 – $3,500 |
| Insulation removal and replacement | $1,500 – $5,500 |
| Attic air sealing before blowing | $600 – $2,000 |
Does blown-in insulation really help with Summerlin summer heat?
Yes. A full, even blanket in the roof assembly slows heat moving into the living space, which reduces how hard your cooling system works. Results depend on your attic, ventilation, and existing air sealing, and we check all three during the free estimate. Call (844) 320-9312 for an exact quote.
Can you blow insulation into an attic with a low tile roof?
Usually, yes. Tile roofs in Summerlin often mean tight framing and limited clearance, so we plan access and hose routing before the install day and work carefully around the underlayment. Some attics need a partial removal first. The estimate visit tells us which.
Brands We Service in Summerlin
We install products from eight manufacturers, including Knauf, Rockwool, CertainTeed, and Icynene, which gives us real range across fiberglass, mineral wool, and spray foam. Recommendations follow your home’s conditions rather than a limited catalog. Because materials are sourced per job, timing depends on the product selected. See our brands.
Pricing for Insulation Company in Summerlin, NV
| Service | Typical range in Summerlin |
|---|---|
| Blown-in insulation | $1,200 – $3,500 |
| Attic insulation | $1,500 – $4,500 |
| Spray foam insulation | $2,500 – $8,000 |
| Insulation removal and replacement | $1,500 – $5,500 |
| Attic air sealing | $600 – $2,000 |
| Radiant barrier installation | $1,000 – $3,000 |
| Wall insulation | $1,500 – $5,000 |
In Summerlin, price climbs with attic complexity: low-clearance tile framing, two-story kneewall cavities, and high-ceiling great rooms all take more labor than a simple open attic. Removal of settled material adds to the job. These are typical estimated ranges, and the written estimate you get after the visit sets the final price.
Neighborhoods We Serve in Summerlin
We work throughout Summerlin and the surrounding western valley, from the older villages closer to the 215 down to the newer builds on the western edge. Homes here share the same era of construction and the same brutal attic heat, so the approach carries across neighborhoods even when the framing doesn’t. We schedule estimate visits across the area and can usually find a slot that fits your week.
- The Ridges
- Red Rock Country Club area
- Summerlin West
- The Paseos
- Sun City Summerlin
Service Area – Cities Near Summerlin
Summerlin sits on the west side of the valley, and we also work in the communities around it. If you’re just outside the master plan, we can still help: Spring Valley, NV, Las Vegas, NV, Winchester, NV, and Paradise, NV are all within our service area. Same free estimate, same written pricing, same material options.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Insulation Company in Summerlin
We schedule free estimate visits across Summerlin through the week, Sunday through Friday. Call (844) 320-9312 and we’ll book the next opening that works for you. The written price follows the visit.
Requirements vary by the specific job and the community, and some Summerlin villages have HOA rules that touch exterior work. We check the current requirement with the city’s building department during the estimate so nothing gets missed.
Yes. We serve Summerlin from the older villages near the 215 out to Summerlin West, along with nearby Spring Valley and Las Vegas. If you’re unsure whether your address falls inside the area, call and we’ll confirm.
If your attic is running hot and your NV Energy bill keeps climbing, the fix starts with a free estimate. We’ll look at your existing insulation, ventilation, and air sealing, explain the tradeoffs between materials, and put a written price in your hands. Call (844) 320-9312. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A local pro comes out to measureLicensed and insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Summerlin Customers Say
"Told me the crawlspace didn't need doing and only the attic did. Half the job, half the money."
- Nia Whitfield"Handled the utility rebate paperwork, which knocked a real amount off the final cost."
- Rosa Torres"Plastic laid from the front door to the attic hatch and they vacuumed the hallway afterward."
- Veronica Herrera